ASTRA.60/7R

Automatic Edge Bander ASTRA.60/7R

Pre-milling unit Gluing unit End-cutting unit Edge trimming unit
1 FREE SPACE 1 FREE SPACE 1 FREE SPACE

Technical data

Min width of the panel mm 100
Min length of the panel mm 120
Max thickness of the panel mm 60
Min thickness of the panel mm 9
Edge dim. in rolls min – max mm 0,4 (min.) – mm 3 (max.)
Edge dim. in strips (with opt. kit processing edges in strips) mm 5
Feed speed m 1′ 10
Glue pot capacity lt 2
Installed power kW 5,2
Air pressure Bar 7
Weight kg 920
Length of the machine mm 3420

CE EQUIPMENT

  • Tape roll holder table ø 700 mm
  • Nr.2 tools
  • Conveyor roller for wide panels
  • 3 mm thickness roll edge cutter
  • Manual movement of the upper pressure with digital readout
  • Teflon pot
  • Protection booth on all operation units
  • Nr. 2 dust extraction hood ø 110 mm + nr. 1 ø 120 mm
  • Operating units managed by PLC
  • Quick release glue pot

OPERATING UNITS

  • Pre-milling unit
    • 2 HF motors 12.000 rpm – kW 1,1 each
    • 2 cutters ø 50
    • useful working height 60 mm
    • two HF motors featuring automatic timed operation to avoid panel chipping
    • 1st motor anti-clockwise rotation / 2nd motor clockwise rotation
  • Gluing and edge pressure units
    • Teflon pot / Glue spreading roller
    • Temperature controlled through the control panel
    • Glue pot with automatic stand-by of the temperature.
    • Nr. 1 rubbed pressure roller ø 70 mm ,2°,3° roller ø 55 mm
  • End-Cutting unit
    • Nr. 2 HF tilting motors 12.000 RPM – kW 0,22 each
  • Fine-Trimming unit
    • 2 HF motors kW 0,55 each
    • with digital readout

UPON REQUEST

Protection booth for gluing unit

Edge scraper with separator manifold and chip collection

Glue scraper

Brushes

Anti-adhesive unit

Cleaning unit

IR lamp

Spare glue pot for EVA glue To be deducted in case of a machine equipped with a combined PU/EVA pot

Predisposition for mounting PU/EVA combined glue pot

PU/EVA combined glue pot

Diamond tools h60

Vertical copiers ‘’NESTING’’ for fine trimming unit and edge scraper

Touch screen 7” control panel

Kit processing edges in strips up to 5 mm (touch screen 7” is required)

Pre-milling motors power increase 2x kW 1,5

Software for connection with management software in accordance with the requirements of the Industry 4.0 regulations (touch screen 7” is required)

Request a quote

Request a personalized quote for your needs, we will contact you within 48 H!