Automatic Edge Bander with Pre-Milling and Rounding Units at 1 Motor ASTRA.60/6RA COMPACT

Pre-milling unit Gluing unit End-cutting unit Edge trimming unit Rounding unit

Technical data

Min width of the panel mm 100
Min length of the panel mm 120
Min length of the panel with rounding unit mm 170/250 it depends on panel thickness
Max thickness of the panel mm 45/60 opt
Min thickness of the panel mm 10
Edge dim. in role min – max mm 0,4 (min.) – mm 3 (max.)
Edge dim. in strips (with opt. kit processing edges in strips) mm 5
Feed speed m 1′ 10
Glue pot capacity lt 2
Installed power kW 8,5
Air pressure Bar 7
Weight kg 1020
Length of the machine mm 3590


  • Tape roll holder table ø 600 mm
  • Nr. 2 diamond tools
  • Fixed conveyor roller for wide panels
  • 3 mm thickness roll edge cutter
  • Manual movement of the upper pressure with digital readout
  • Teflon pot
  • Protection booth on all operation units
  • Nr. 2 dust extraction hood ø 110 mm + nr. 2 ø 120 mm
  • Operating units managed by PLC with 7’’ touch screen control panel
  • Quick release glue pot


  • Pre-milling unit
    • 2 HF motors 12000 rpm – kW 1,1 each
    • 2 cutters ø 50 mm
    • Useful working height 60 mm
    • Two HF motors featuring automatic timed operation to avoid panel chipping
    • 1st motor anti-clockwise rotation / 2nd motor clockwise rotation
  • Gluing and edge pressure units
    • Teflon pot / Glue spreading roller
    • Temperature controlled through the control panel
    • Glue pot with automatic stand-by of the temperature.
    • Nr. 1 rubbed pressure roller ø 70 mm, 2°, 3° roller ø 55 mm
  • End-Cutting unit
    • Nr. 1 HF motor 12.000 rpm – kW 0,3
  • Fine-Trimming unit
    • 2 HF motors kW 0,55 each
    • with digital readout
  • Rounding unit
    • 1 HF motor 12000 rpm – kW 0,55


Protection booth for gluing unit

Telescopic conveyor roller for wide panels

Edge scraper with separator manifold and chip collection

Glue scraper


Anti-adhesive unit

Cleaning unit

IR lamp

Spare glue pot for EVA glue (to be deducted in case of a machine equipped with a combined PU/EVA pot)

Predisposition for mounting PU/EVA combined glue pot

PU/EVA combined glue pot

Diamond tools h60

Vertical copiers "NESTING" for fine trimming unit and edge scraper

Kit processing edges in strips up to 5 mm

Pre-milling motors power increase 2x kW 1,5

Software for connection with management software in accordance with the requirements of the Industry 4.0 regulations

Request a quote

Request a personalized quote for your needs, we will contact you within 48 H!