CN Automatic Edge Bander with Pre-milling ASTRA.60/7R.CN

Pre-milling unit Gluing unit End-cutting unit Edge trimming unit

Technical data

Min width of the panel mm 100
Min length of the panel mm 120
Max thickness of the panel mm 60
Min thickness of the panel mm 9
Edge dim. in rolls min – max mm 0,4 (min.) – mm 3 (max.)
Edge dim. in strips (with opt. kit processing edges in strips) mm 5
Feed speed m 1′ 10/14
Glue pot capacity lt 2
Installed power kW 6,2
Air pressure Bar 7
Weight kg 990
Length of the machine mm 3420


  • Tape roll holder table ø 700 mm
  • Nr.2 tools
  • Vertical adjustment of pre-milling unit
  • Conveyor roller for wide panels
  • 3 mm thickness roll edge cutter
  • Manual movement of the upper pressure with digital readout
  • Teflon pot
  • Protection booth on all operation units
  • Nr. 2 dust extraction hood ø 110 mm + nr. 1 ø 120 mm
  • Touch screen control panel 10’’
  • Quick release glue pot
  • Predisposition for mounting PU/EVA combined glue pot


  • Pre-milling unit
    • 2 HF motors 12.000 rpm – kW 1,1 each
    • 2 cutters ø 50
    • useful working height 60 mm
    • two HF motors featuring automatic timed operation to avoid panel chipping
    • 1st motor anti-clockwise rotation / 2nd motor clockwise rotation
  • CN Gluing and edge pressure units managed by control panel
    • Teflon pot / Glue spreading roller
    • Temperature controlled through the control panel
    • Glue pot with automatic stand-by of the temperature.
    • Nr. 1 rubbed pressure roller ø 70 mm ,2°,3° roller ø 55 mm
  • End-Cutting unit
    • Nr. 2 HF tilting motors 12.000 RPM – kW 0,22 each
  • CN Fine-Trimming unit managed by control panel
    • 2 HF motors kW 0,55 each


Protection booth for gluing unit

CN infeed guide managed by control panel

Powered pressure traverse managed by control panel

CN edge scraper with separator manifold and chip collection managed by control panel

Glue scraper with pneumatic insertion by control panel


Anti-adhesive unit

Cleaning unit

IR lamp

Spare glue pot for EVA glue To be deducted in case of a machine equipped with a combined PU/EVA pot

PU/EVA combined glue pot

Diamond tools h60

Vertical copiers ‘’NESTING’’ for fine trimming unit and edge scraper

Kit processing edges in strips up to 5 mm

Pre-milling motors power increase 2x kW 1,5

Software for connection with management software in accordance with the requirements of the Industry 4.0 regulations

Request a quote

Request a personalized quote for your needs, we will contact you within 48 H!