Product Category

Combined
- FS
- KOMBI
- TENO
Panel Saw
- SE PRIMA
- SE EVO
- SE KLASS
- SE PLUS
- SE PRO
- SE X
Surface Planers
- F FLASS
- F PRO
Thicknessing Planers
- SP KLASS
- SP PRO
Spindle Moulders
- T 100
- T 120
- T 120 EVO
Feeders
- AV
- VAR
Bit Mortising Machines
- CTF
- CTM
Louver Groover
- MECHANIC
- PNEUMATIC
Chain Mortising Machines
Boring Machines
- 3 HEADS
- 5 HEADS
- MULTISPINDLE
Routers
Edge Banders
- ACCESSORIES
- ASTRA
- EB
- ONE
Wide Belt Sanding Machines
Brushing Machines
Sanding Machines
Lathes
- KONTOUR
- LT
Planer Machines
- P KLASS
- P PLUS
Radial Arm Saw
Circular Saw with Pendolous Swing
Multi-Rip Saw
Band Saw
Vertical Beam Saw
Grinding and Sharpening Machines
- SHARPENING
- KNIVES-GRINDING
- SHARPENING FOR WIDIA BLADES
- UNIVERSAL
Welding Machines
Frame Clamps
- PISTONS
- AUTOMATIC
- MANUAL
Presses
- HOT
- COLD
- VACUUM
Gluing Machines
- 1 ROLLER
- 2 ROLLERS
Guillotine Shears
Veneer Pack Machine
Circular Saw for Veneer Packs
Cut-off Saw
Suction Units
- ALFA
- ECO

SE EVO

Panel Saw SE 2.6 – 3.2 – 3.8 EVO

Max blade Ø 450mm.

Technical data

	SE2.6 EVO	SE3.2 EVO	SE3.8 EVO
Sliding table dimensions	mm 2600×400	mm 3200×400	mm 3800×400
Table dimensions	mm 650×1100	mm 650×1100	mm 650×1100
Squaring frame dimensions	mm 640×1190	mm 640×1190	mm 640×1190
Saw blade bladeØ/holeØ	mm 400/30	mm 400/30	mm 400/30
Cutting height with blade Ø 300 mm 90°/45°	mm 80/58	mm 80/58	mm 80/58
Cutting height with blade Ø 400 mm 90°/45°	mm 130/93	mm 130/93	mm 130/93
Cutting height with blade Ø 450 mm 90°/45° at lowest position the blade sticks out from the table of 25 mm	mm 155/110	mm 155/110	mm 155/110
Scoring blade bladeØ/holeØ	mm 120/20	mm 120/20	mm 120/20
Scoring blade speed	rpm 7500	rpm 7500	rpm 7500
Scoring motor power	HP 1	HP 1	HP 1
Cutting width on rip fence	mm 1250	mm 1250	mm 1250
Saw blade speed	da 2800 a 5600 rpm	da 2800 a 5600 rpm	da 2800 a 5600 rpm
Saw blade motor power	HP 7,5	HP 7,5	HP 7,5
Weight	kg 730	kg 800	kg 840

CE EQUIPMENT

CE EQUIPMENT

Powered saw blade unit upstroke and tilting managed by VK3 control panel:
- Manual and automatic functions for the lifting and tilting of the saw blade unit
- Speed selection of the saw blade (it depends on the blade diameter)
- Readout on encoder
- Automatic axis calibration
HM saw blade
Hanging saw blade safety protection “CX 400”
Squaring frame with recovery of the quota reference for the squaring fence stops
Large out rigging arm with sliding on recirculating ball sleeves
Electronic digital readout for tilting
Table extension
Angular cutting device
Eccentric clamp
No. 2 dust extraction hoods (1 x ø 120mm, 1 x ø 80mm)
Start and stop of the main motor managed by inverter
Scoring unit with independent motor. Rise & translation movement on linear guides. Pneumatic cylinder on/off for the scoring unit. The scorer blade rise only when the motor is switched on

UPON REQUEST

Pneumatic cylinder on/off for the scoring unit. The scorer blade rise only when the motor is switched on.

Powered rip fence managed by control panel with semi and fully automatic functions: incremental function; readout on encoder; presence detection system for the automatic change of the fence position, according to the used fence profile (high or low); automatic axis calibration; automatic recovery of the quota from cutting width when the blade get tilted (compulsory control panel V8 or V10)

Touch screen control panel 8" model V8: semi and fully automatic functions; automatic recovery of the quota from cutting height when the blade get tilted (hanging control panel/fixed hanging control panel with joint are compulsory)

Touch screen control panel 10’ model V10: semi and fully automatic functions; automatic recovery of the quota from cutting height when the blade get tilted (hanging control panel/fixed hanging control panel with joint are compulsory)

2 axis automatic setting of the scoring unit (control panel V8 or V10 is compulsory)

Hanging control panel

Fixed hanging control panel with joint

Squaring frame type ‘’EASY’’ with mechanical self-adjustment of the stops position

Double sided mitre fence

Double sided mitre fence with electronic digital display

Motor HP 10

Motor HP 12

Supplement for self-braking motor with brake release (standard configuration)

Main motor managed by inverter (standard configuration)

Hanging saw blade safety protection “CX 400” Suction hood Ø 80 mm (standard configuration)

Squaring fence with 3 electronic readout

Rip fence with electronic readout

Cutting width on rip fence 1500 mm

ON/OFF switches on the sliding table (it is compulsory ‘’Automatic delta/star switch on’’ for configurations without main motor managed by inverter)

Automatic delta/star switch on

Small table for parallel cuts

Bar pneumatic presser for the whole length of the sliding table

2nd squaring frame for sliding table

Laser (without hanging control panel option)

Laser (fixed hanging control panel with joint is compulsory)

Software for connection with management software in accordance with the requirements of the Industry 4.0 regulations (compulsory control panel V4C or V10)